Fire Resistant Fabric Linen Coated Blackout Fabric for Curtains 100% Polyester, Soft Drape, NFPA 701

Test Report for Flame Retardant Coated Fabric According to DIN4102-B1 Standard

• Report Number: AJFS2209007335FF
• Sample Description: Flame retardant coated fabric, color gray, composition polyester.
• Test Requirements: According to DIN 4102-1:1998-05 standard, the fire behavior of building materials and elements is classified, testing for Class B1 materials.
• Test Results: The sample meets the requirements of Class B1 materials as per DIN 4102-1:1998-05 standard.
• Test Details:
• Brandschacht Test:

Exposed Surface: White surface

Maximum Flame Height: 40 cm (lengthwise), 40 cm (widthwise)

Flame Persistence Time: 00:38 (lengthwise), 00:44 (widthwise)

Melting/Burning Through: Yes (both lengthwise and widthwise)

Back of Specimen Ignition: Yes (both lengthwise and widthwise)

Flaming/Glowing Droplets: Yes (both lengthwise and widthwise)

Ignition Time: 00:20 (lengthwise), 00:23 (widthwise)

Specimen Material Falling Off in Separate Droplets: Yes (both lengthwise and widthwise)

Residual Length: Average 62.3 cm (lengthwise), Average 65.5 cm (widthwise)

Smoke Temperature: Maximum Average 154.7 °C (lengthwise), Maximum Average 151.8 °C (widthwise)

• Ignitability Test:

Flame Application Time: 15 seconds

Flaming Reaching the Gauge Mark Within 20 Seconds: No (both lengthwise and widthwise)

Afterflame Time: Ranging from 2 to 4 seconds

Maximum Flame Height: Ranging from 5 to 9 cm

Molten Dripping: No (both lengthwise and widthwise)

Test Report for M1 Inherent Flame Retardant Blackout Fabric

• Report Number: AJFS2405006006FF
• Sample Description: Inherent flame retardant blackout fabric, color white, composition 100% polyester.
• Test Requirements: According to NF P 92-507:2004 standard, the fire reaction of building interior fitting materials is classified.
• Test Results: The sample is classified as M1 level.
• Test Details:
• Electrical Burner Test (NF P 92-503:1995):

Hole Formation During Testing: Yes

Application Time: 20 seconds

Maximum Afterflame Time: 0 seconds

Flaming Molten Droplets: No

Non-flaming Molten Droplets: No

Flaming Debris: No

Non-flaming Debris: No

White-hot Spots with Propagation Effects: No

Maximum Destruction Length: Average 40 mm

Destroyed Width: 0 mm

• Flame Persistence Test (NF P 92-504:1995):

Ignition Time: 0 seconds

After-flame Time: Ranging from 0 to 30 seconds

Flaming Drops: No

Non-flaming Drops: No